Countertop Sealing in Chicago
Natural stone is porous. A good impregnating sealer slows down how fast oil, wine, coffee and water soak in, so you have time to wipe spills before they stain. We deep clean the countertop, let it dry, and apply a penetrating sealer chosen for your stone.
How do I know if my stone countertop needs sealing?
Put a few drops of water on the countertop and wait a few minutes. If the stone darkens, the water is soaking in and the countertop needs sealing. If it beads up, the sealer is still working. Sealing helps prevent stains but does not stop etching on marble. Send us photos for a quote.
Signs your countertop needs sealing
- Water darkens the stone instead of beading
- Oil or grease spots near the cooktop
- Rings from wine, coffee or juice
- Dark areas around the sink
- It has been years since the last sealing
Our process
- Water test We check how fast the stone absorbs to confirm it needs sealing.
- Deep clean Residue and old film are removed so the sealer can penetrate.
- Dry The stone is allowed to dry so moisture is not trapped.
- Apply sealer A penetrating sealer suited to your stone is applied and worked in.
- Remove excess Excess is buffed off so no hazy film is left behind.
Stones we work on
Granite, Marble, Quartzite, Limestone, Travertine
More real sealing jobs
- Glencoe Slate Sunroom Floor Deep Clean (Glencoe, Slate): This Glencoe sunroom featured a gorgeous diagonal-laid slate floor that had become dull and grimy from years of foot traffic and sun exposure. The natural earth tones of the slate were hidden beneath layers of old sealer and embedded dirt. Our team performed a thorough strip-and-clean process, removing all old coatings and deep-cleaning the textured surface. After the slate dried, we applied a color-enhancing sealer that brought out the warm browns, greens, and coppers of the natural stone. The decorative border detail was also carefully restored to its original crisp appearance.
- Geometric Marble Floor Restoration (Schaumburg, Marble): Restored an intricate geometric-pattern marble floor in a Schaumburg foyer. Each marble section was individually diamond-honed to remove years of foot traffic wear and scratches. We color-matched grout lines and performed deep grout cleaning to restore the original contrast. Final polish brought out the natural veining in each marble piece. Sealed with impregnating sealer for long-term protection.
- Kenilworth Marble Shower Restoration & Caulk Replacement (Kenilworth, Marble): Luxury gray marble shower restoration featuring basketweave floor tile cleaning and sealing. Removed deteriorated caulking around glass enclosure, bench seat, and all corner joints—replacing with color-matched mildew-resistant silicone. Professional grout cleaning and sealing restored the contrast between marble tiles. Diamond honing removed etch marks from acidic shower products. Impregnating sealer applied to all surfaces for long-lasting hard water and soap scum protection.
Before and after
- Granite Floor Polishing & Sealing (Chicago)
- Marble floor polishing and sealing (Chicago)
Does sealing stop etching on marble?
No. Sealer helps against stains, but acids still react with marble. Etch marks are removed by honing and polishing.
Do quartz countertops need sealing?
Engineered quartz is non-porous and generally does not need sealing. Natural stone does.
How much does countertop sealing cost?
It depends on the size of the countertop. Send us photos and we will reply with a quote.